P3100 oil filled hydraulic deadweight tester current models are P3111, P3112, P3113, P3114, P3115, P3116, P3123, P3124, P3125 and P3125XT.
P3200 water filled hydraulic deadweight tester current models are P3211, P3213, P3214, P3223 and P3224.
The latest version of the manual was published in November 2010. Some of the part numbers have changed since that time, and are noted in the below marked-up pdf copy of the manual (click on the link below to view or download). A number of the o-rings were Buna and are now Viton.
It is often preferable to order an o-ring kit rather than individual o-rings. Here are the available o-ring kits. See notes below the table for types of recommended grease.
Part Number: 3891108
Description: P3100SK,SEAL KIT, P3100 SERIES (Rev 005)
This kit is for both the P3100 and P3200 family of deadweight testers. The kit includes these parts. Most seals are Viton but a few are Buna-N
|in manual||3875234||1||3100SK-DS,SEAL KIT DATASHEET|
|1 in 2-6||3865601||2||54-900-008,O-RING BUNA-N 3/16 X 1/16 XSEC 90 DURO [SZ 8]|
|2 in 6-6||3865174||1||54-703-011,O-RING:VITON 5/16 X 1/16 XSEC (SIZE 011)|
|3865188||3||54-703-027,O-RING:VITON 1.300 ID X .070 XSEC|
9 in 6-2
|3922070||2||P109737,O RING [BS111] VITON 5/8 X 0.103 XSEC|
|6 in 6-1||3865245||1||54-703-114,O-RING VITON 5/8 X 3/32 XSEC|
|3 in 6-1||3865277||1||54-703-12,O-RING VITON 3/8 X 1/16 XSEC|
|3865326||2||54-703-145,O-RING VITON 2-9/16 X 3/32 XSEC|
|2 in 6-4||3865332||1||54-703-15,O-RING VITON 9/16 X 1/16 XSEC|
|13 in 6-5||3865359||1||54-703-16,O-RING VITON 5/8 X 1/16 XSEC, SIZE 16, 70 DURO|
|7 in 6-4||3919118||1||P102810,ANTI EXTRUSION RING, PTFE .D: .312 IN O.D: .50INCH THK: .058INCH MAX|
3 in 2-6 &
|3865195||5||54-703-10,O-RING VITON 1/4 X 1/16 X SEC|
|9 in 6-5||3920516||1||P104708,ANTI-EXTRUSION RING PTFE [BU 111] SPIRAL B/U|
|11 in 6-7||3921912||1||P109376,ANTI-EXTRUSION SEAL PTFE (SP BU 008)|
|3 in 6-6||3867912||1||P109730,O-RING 2 X 2 VITON, 0.21 OD X 0.07 XSEC|
|6 in 6-4||3867920||1||P109736,O RING 5/16 ID X 3/23 XS VITON, SZ 109, 90 DURO|
|3926855||1||25-1091,FITTING,ADAPTER,NYLON,M5X0.8 TO 4MM OD TUBING,PUSH-ON,RT ANGLE,SWIVEL|
|3923564||1||S56-0039,PNEUFIT 1/8 BSPM STRGT ADPT 4MM TUBE*SOON OBS|
|3927996||1 FT||86-1013,TUBING NYLON 6 CLEAR 4MMOD X 2.7MM ID|
|9 in 6-6||3966453||1||CHECK VALVE,BRASS POPPET,W/ VITON SEAL,1/8 IN. FNPT,1 PSIG,SWAGELOK B-2C4-VI-1|
|old check valve was PN 3867767|
Corrosion control wheel bearing grease is used on the main thread of the lead screw (typically available at auto parts stores).
Krytox grease is used on the ball bearing, rambler o-ring and other -rings.
Part Number: 2493420
Description: (102496) Krytox® GPL205/6 High Temp Lubricant, 0.5 oz. tube
Notes: Krytox GPL205/206 MSDS Sheet is here, Krytox Lubricant MSDS
Contact Fluke Calibration Pressure Support at the below link or by calling +1.355.3225