Fluke DAQ Registration Process 

Before you start the registration process a couple of things are assumed:

• Fluke DAQ 6 is installed
• USB drivers for 1586A / 2638A (if you are planning on using the USB interface) have been installed from the CD.

License Registration Process

The license registration has three components:

1. An activation key supplied on a sticker attached to the CD case
2. Site Code (derived using instructions in this document)
3. Site Key (obtained from Indusoft/Aveva – also documented here)

Obtaining Site Code:

Start - All Programs – Fluke DAQ 6.0 – Register

The Protection Manager window appears:

Select Softkey and Check buttons.

Softkey Settings window appears:

Click Change License button.

Softkey Settings window appears:

Click on Network Adapter dropdown box

Select one of the Network Adapter options – preferably a permanent one such as the Ethernet module. This will generate the Site Code  (like this one for example: E0E4 0485 A5EB E1A5 CE7C 6105 978B AB76 BA) in the Site Code field.

Copy Site Code for the next step using the copy button

Obtaining Site Key

Send an email to license@indusoft.com with the following information:

• Contact Name (First and Last)
• Email Address
• Activation Key (from your CD Case)
• Serial Number (from your CD Case)
• Site Code (obtained in previous section)

You will receive a response with your Site Key to use in the remainder of the process. Note: it may take more than a day to receive a reply.

Authorize

Return to the Change License Softkey window:

Paste your Site Key into the Site Key field and click “Authorize”.  The authorization may take a few minutes.  You will be notified that your key was accepted:

Once you get the confirmation you can close the window if it doesn't close automatically.

Launch Fluke Daq 6.0 and you should see the following

Congratulations you are fully licensed with Fluke DAQ 6.0!