Precision, Performance, Confidence. ™

Display - Replacement Display for 7000 Series Pressure Controllers and Monitors

This replacement display kit is for all models (i, xi, HP, LP, SYS, etc.) of these pressure controllers and pressure monitors:

7050, 7052, 7250, 7252, 7750

Part Number: 3879016

Description: 7250-116-A, DISPLAY UPGRADE KIT

It includes a new display with 5V power supply cable, inverter, VGA board, sheet metal bracket, various screws and washers and instructions. The same instructions are in the file attached to this article (download below).

Call 1.877.355.3225 or email the Orders Group for price and/or to place an order.

Contact Technical Support at the same number or Pressure Support for questions or information on displays for other models. 

Have more questions? Submit a request

Comments

  • Avatar
    Rich Gajdowski

    If anyone has the wherewithal to give this a try, I was able to replace the florescent tube with a 12v LED strip I found on e-Bay. The strip is 3 feet long, and can be cut so that it is just about the right size to fit in the spot where the tube resides. It cost less than $5.00 plus time to install.

Please sign in to leave a comment.