0

Martel 3001 Calibrator

Does anyone happen to have a procedure for a Martel (Fluke) 3001 calibrator? I did not see one on the gold disk.

3 comments

Date Votes
0
Avatar
Chad D.

Hello msandel, we are currently developing the Fluke 7526A verification procedure for the Gold CD.  The Martel 3001 looks very similar, so we will work to obtain the hardware for testing, and develop it in parallel.  Thank you for your request!

0
Avatar
Skye Holleman

The Martel 3001 is a lot, a lot like the 525. Actually if you open the Martel up, there's a 525 board in there. The problem I found when trying to automate the procedure was that certain commands in the 3001 manual via GPIB don't work with MET/CAL. I can share what I have, however it's incomplete and you'd have to severely baby it, but the building blocks are there. Lemme know. Alternatively, you can wait for the next Gold CD.

0
Avatar
Nathan Wright

nci_skye,

We own several temperature data loggers that can communicate via RS232.  Currently we manually calibrate these data loggers with our Martel 3001.  I am looking to automate the calibration process of these data loggers.

Could you point me in the right direction on how to get started creating my own automated PC program using the 3001 command set?  I realize this is a question that perhaps may not be answered easily via an email...but some general advice would be greatly appreciated.

Thank you,

Nathan

Please sign in to leave a comment.