0

Performing Calibrations with MET/TEAM

Can one go from the MET/TEAM screen to the MET/ CAL to perform a cal by selecting a drop down like we could do with MET/TRACK.  Or does one normally do that manually?   Is there a users guide or only the help screens?

 

Thanks

4 comments

Date Votes
0
Avatar
Ed W.

Yes a user can launch a MET/CAL procedure from the Work Order page in MET/TEAM. When things are correctly configured the user clicks on the ellipse in the “Data Sheet” field.  This will launch the MET/CAL runtime with the asset and procedure from the Work Order pre-selected.  Please see attached picture.

 

Attachment not imported: run_metcal.png
0
Avatar
Kevin Griffis

Larry,

To expand a bit on Ed's response.  See that attached image for the "Procedures" screen in MetTeam.  This is what Ed means by, "correctly configured".  If, that is, I remember correctly.

Attachment not imported: 5-7-2013_8-54-14_am.png
0
Avatar
Lawrence Rodkey

Thanks for the clarification.  I did get it to work.

 

Is there a comparison list available for what is included in MET TEAM versu MET TEAM EXPRESS?  MET TEAM EXPRESS will allow us to perform all the basic calibration requirements ....Correct?  Is the demo version the full version?

0
Avatar
Kevin Griffis

Here's a sheet that Bill Spath at MetSupport sent me.  It shows both, and highlights the differences.

Attachment not imported: met_team_express_vs_met_team.pdf

Please sign in to leave a comment.