0

Fluke 5520A and Fluke 8508A communication

Hello

I want to configure mi Fluke 5520A to apply 10V DC and then I want to measure with my Fluke 8508A automaticaly, so can you help me with my program?

4 comments

Date Votes
0
Avatar
Nathan Ryder
 This will tell the 5520A to output 10V DC then tell the 8508A to take a reading
 
It will put the output value of the 5520A into register MEM1 and the reading the 8508A got into MEM
 
1.001 5520 10.000V N 2W 1.002 8508 10.000V N 2W
 
                
0
Avatar
Nathan Ryder
 This will tell the 5520A to output 10V DC then tell the 8508A to take a reading
 
It will put the output value of the 5520A into register MEM1 and the reading the 8508A got into MEM
 
1.001 5520 10.000V N 2W 1.002 8508 10.000V N 2W
 
                
0
Avatar
Dale Chaudiere

The 5520 FSC statement should have MOD4 = "S" (Setup).  MOD4 = "N" will cause the slew dialog to be displayed.

0
Avatar
Denis Malakhov

For better result add delay between commands and increase resolution:  

1.001 5520 10.000V N 2W
#delay to output stability 
1.002 [D10000]8508 10.0000V s e 2W

Please sign in to leave a comment.