NI PXI-4065 overvoltage compliance
I am attempting to run the NI PXI-4065 adjustment procedure with a 5730A, and when it gets to the 3 amp range DC current adjustment section the 5730A goes into overvoltage compliance at 2.2 amps. I am wondering if anyone else has had this issue. The ac current adjustment does not have this problem. I ran into the same problem with the current verification portion of the PXI-4065 verification procedure, and the way around it was to modify the procedure to slowly step up the current until it reaches 2.2 amps. I tried this same thing with the adjustment procedure, but it did not work. Any insights would be helpful.
Please sign in to leave a comment.